Two homes are better than one: Robert Street Residences

Two adjacent contemporary houses in a Victorian Toronto neighbourhood subtly respond to their local vernacular, and to each other. The homes were designed and constructed over a span of 10 years, the first house was completed in 2011, and the second house in 2021.

Designed by Michael Taylor of Taylor Smyth Architects —architectural partner — The 3,000 square foot residences are located on a heritage street with mostly historically-designated houses.

Photo credit: Tom Arban Photography Inc.

The homes replace non-descript 1960’s bungalows with a new take that references the surrounding Victorian vernacular through scale, proportion, and colour.

A distinctive feature of many of the old houses on the block was a vertical gable and front porch. This inspired the configuration of the front façade of the first house with a projecting two storey bay window that picks up on the proportion of these gables, and the inclusion of a front porch.

Photo credit: Tom Arban Photography Inc.

However, instead of treating these as two distinct elements, the porch and the bay window are unified into one composition that folds up from the porch overhang to become the surrounding frame of the bay window.

Photo credit: Tom Arban Photography Inc.

The second house also has a porch that continues the sequence of porches of the adjacent cottage-style Victorian houses. The tall second floor windows are each surrounded by a projecting metal frame, and set into a red brick façade. Randomly sized, they evoke the dormer windows of the neighbouring houses in a contemporary composition.

Photo credit: Tom Arban Photography Inc.

One of the challenges was to hide the garage doors, since there are no other garage doors facing the street. The solution for both houses was to clad the surfaces of the ground floor façade—the garage door, walls, front door, and the soffit of the porch—with the same material.

The team sourced a panel product called Trespa, a high-pressure compact laminate panel based on thermosetting resins, homogeneously reinforced with wood-based fibers with a printed surface layer that looks like oak and is virtually indistinguishable from real wood, except that it is maintenance free.

The client acted as the general contractor for both houses, as well as contributing to the interior design. Her intention was to occupy the first house and then sell it once the second house was complete and ready for her to move into. Lessons learned from the design and construction of the first house were applied to the second house, including design features to improve energy efficiency.

The ground floor features in-floor radiant heating, and flat roofs were built with continuous insulation on top of the deck, rather than with insulation in-between joists. The front driveway features a minimal footprint (2 parallel strips), built with permeable pavers to maximize natural water absorption.

Photo credit: Tom Arban Photography Inc.

Both houses are organized around a central skylit atrium with abundant natural light, and have custom canopies above the terraces, which maximize passive heat gains in the winter, while also providing shade in the summer.

Technical sheet

SIZE: Residence I: 3,000 sq. ft.; Residence II: 3,500 sq. ft.

LOCATION: Toronto, Canada

COMPLETION: Residence I: 2011; Residence II: 2021

PROJECT TEAM: Michael Taylor, Partner-in-Charge; Marco Bonatti, Project Architect